Green ink Palm old trees 　Ocean Blue 　　Green shade 　　Ukraine carbon ash 　Red　Asia 　Red Jujube Brown 　Gray Ink

1 Product purpose :Products applicable to the sloping roof waterproof single layer and multi-layer waterproof level.
2 Product performance characteristics :Color asphalt shingles on the carpet of glass fiber matrix, high quality oxide coating raw materials, such as petroleum asphalt, a granular mineral color coverage of another, spreading to isolate the material, made of tile-shaped roofing sheets. Products with rich colors and a variety of forms, light weight and durability, and simplicity of construction, products meet industry standards "JC/5.3-92 shingles" the requirements, the main properties are as follows :
Soluble content : (Excellence goods / commodities qualified) 1900g/m2/1450g/m2);
Rally : (25 ± 2. C vertical) is not less (Excellence goods / commodities qualified), 340N/30N;
Degree heat : 85 ± 2. C, 2h Tu should be no sliding cover and concentration of bubbles.
Flexibility : not more than : 10. C (35 mm radius around the park or rod bending plate crack-free).

Product characteristics
● Sophie light nature : only the weight of clay kilowatts, concrete tile the fifth, loading convenience, Vanuatu not only for surface can be curved into Jiwa.
● Quality appearance : different colors, different shapes can pose a variety of forms, pleasing to the eye level.
● Economic and practical : Products and waterproofing and decorative integration benefit of the entire construction cost of the reduction.
● Fast and easy installation : Construction of the cold, clean, simple.

Products with rich colors and a variety of forms, light weight and durability, and simplicity of construction, products meet industry standards "JC/T530-92 shingles" the requirements, the main properties are as follows :
Color asphalt shingle performance indicators (JC/T503-92)

4 Use : In accordance with Shanghai building waterproofing materials (Group) Company prepared by the "color of asphalt shingle tile roof engineering point of order"

5Storage and transport : the storage and transportation of perpendicularly height of not more than 15 tied to avoid the rain, the sun and moisturizing, and pay attention to ventilation. Effective storage products for a year

Construction of general provisions
1, the color of asphalt shingle construction, roofing should develop construction techniques, in accordance with the design requirements, combining the content of this chapter, from material selection, construction sequencing, operation and quality requirements and acceptance, be specific, to ensure the quality of construction.
2, the color of asphalt shingle specifications, and technical requirements should be consistent with the provisions of this order, and sample tests use only after passing.
3, across the roof prevent the water pipes, or embedded pieces of equipment, etc., must be waterproof layer in the pre-installed, Grass-admission pass before the construction of colored asphalt shingles waterproof layer, not in the waterproof layer is completed, stay in their burrows or above other construction.
　Construction requirements :
1, waterproof layer level shall meet the following requirements :
　(1) primary plank is the grassroots or the leveling layer of cement mortar, should be solid formation, with 2 m ruler inspection, the largest gap should not exceed 5 mm, and Gap gently.
　(2) pre-construction waterproofing layer, leveling layer of cement mortar should dry surfaces clean. Cleaned up in only after a weak cold Brush oil. Such as wood grassroots, must be fully felt cushion firmly fixed.
Color asphalt shingles laying
1, in order to ensure that products are laying neatly meets the requirements, before laying in the bedding level missile lines, vertical centerline of the roof and vertical, and at the center roof, the vertical direction of a line between each of the distance, three vertical chip to 167 mm, four vertical chip to 125 mm. Horizontally to the first of the bombs at a distance of 333 mm eaves, and other levels of shells line for the interval between 142 mm, Each one color asphalt shingles to the top of the same by the bullets of the horizon line, lateral and vertical lines even coincide.
2, in the first layer of asphalt shingle color laying, first laying of the initial layer (eaves should set eaves drop plate), Vanuatu from the initial layer of color asphalt shingles removed from Vanuatu skirts cut, the initial layer of the roof along the base of the direct installation a bonding adhesive side is facing up, and preferred eaves, and roof surface contact with the asphalt adhesive applied and used in roofing nails on the roof.
3, the gable roof, the parapet of the roof and prominent chimney formed a Yam Kok, the shop nail color asphalt shingles, Kok Yin required both sides laying waterproofing membrane, the width of each side of not less than 250 mm. Huang Pan-water color asphalt shingle admission first, a mining and metal pressure of the nail, the pressure of the sealing material used to sing seal.
4, waterproof Gutter Gutter should first pave the Department layer width of 800mm above the modified bitumen membrane. In this on the basis of color laying asphalt shingles.
5, the roof and vertical wall of the intersection, the Pan-time use of water, at the junction of two first load length of 200 mm × 20 mm curved metal into rectangular pan-water, 100mm overlap in color of asphalt roofing shingles and the initial layer fixed to the other 100mm brick walls, Then shop outside the first layer of color asphalt shingles, is part of its roof all the coverage, Then sell the second metal layer and two-story Pan said colored asphalt shingles, and so forth. on the vertical walls reuse 200 mm long, 500mm wide and the side wall inset with asphalt or cement mortar plastic seal.
6, Tiger bed with sloping roof, Tiger window roof and the main roof pay unilateral use lap joints Gutter laying method; Tiger windows and walls surrounding the main roof edge can be used above the stagnant water and metal Pan-Pan-Pan parapet water and the laying of water method.
7, extend roof of the sewer pipes and ventilation, plumbing around the leveling layer should be made conical Desk, pipelines and leveling layer should stay cavity, and sealing and filling them with materials, pipe layer around the addition, with synthetic polymer materials to produce pan-hydrosphere, wrapped in pipe wall adhesion, the Pan-hydrosphere singalong with metal hoop hoop tight, water pipeline and the Pan-ring sealed between the sealing material.
8, the cutting Jiwa, Jiwa also available three vertical chip color asphalt shingles from cutting, Jiwa maximum frequency should wind down lap, and should fully take cover two slope asphalt shingles. lap width not less than 100 mm.
9, colored asphalt shingle roof construction at 5 ° C and over, the four winds above and rain, not snow construction, Construction of the construction personnel should wear shoes with rubber soles, try to avoid direct hit, ride colored asphalt shingles and, when necessary, Provisional could pave the protective layer to avoid taint and hit the bad has paved the pad surface.