Product Overview : JS JS waterproof cement-based paint bars (crystal) composite flexible waterproof coating for the flexible materials. Two-component system, response from acrylic with high quality cement and other inorganic filler powder mixed. Smeared with high flexibility, high edible, anti-aging characteristics, and constitute a primary coil perfect waterproofing system impermeability to the long-term effect, according to the need of various color can be made.

Product characteristics :

• Construction convenient, applicable to the outside and the inside. In moist or dry-surface construction, concrete, mortar, stone, wood and other construction materials base.
• High flexibility, bridge 20mm hair is about crack, excellent weathering, water resistance, high temperature, Anti-UV better than ordinary products
• Innocuity market is often applied polyurethane waterproof coating solvent such alternative products。

Applications include :

Widely used in roofing, bridges, tunnels, the wall surface, bathrooms, basements, warehouses, and the waterproof surface.

Project	Specifications
	Ⅰ型	Ⅱ型
Solid Content	＞65	＞65
Construction Temperature	5-40℃
Stem drying timetableh	＜2	＜2
Solid workh	＜4	＜4
Tensile Strength，mpa,≥	＞1.7	＞2.6
Elongation at break ，％，≥	＞200	＞80
Wet bonding strength，mpa,≥	＞0.5	＞1.0
Low Temperature Flexibility（Diameter 10mm Rod）	-10℃ Bar no rift
Impermeability 0.3mpa,30min	Impermeability

Primary treatment :

concrete surface without Mo, grease, release agent, If removed before construction.

Use guide :

• Brushing bead before the increase does not exceed 10% (by volume) of water dilution. Add water, the liquid compound should now add water, stirring with blender edge slowly to powder Stir until fully compound is non-material group (5 minutes stirring time around, preferably not by hand mixing).
• At the corner of the water pipes or parts of the details with brush Tu again. Grassroots clean surface, brush rollers bead, about the thickness of 0.5mm.
• 20 ° C, bead coating dry about 3-4 hours later, with the direction of cross-bead coating Brush second time, and thickness is 0.5mm. The second 24-hour drying times, before walking on the coating or laying find plane (with about 1.667 /Kg ← ㎡, the thickness of 1mm.
• Important project can increase network construction, brushing 3-4 times.
• Not at 0 ° C or in the rain for construction, is not the ventilation is not particularly humid environment construction.

Storage period : 5 ° C stored in the shade above a dry place, the opening was not expected shelf life of six months, powder shelf life of 12 months.

Safety matters : construction to wear gloves and goggles, if the skin or eyes, an hour to wash with.